Write your message
Volume 19, Issue 41 (12-2023)                   Marine Engineering 2023, 19(41): 119-133 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Eslahi M J, kazemi S, Ezam M, Ghodsi Hassanabad M. Numerical Study on Heave Plate Effects on Hydrodynamic Responses of Floating Offshore Wind Turbines. Marine Engineering 2023; 19 (41) :119-133
URL: http://marine-eng.ir/article-1-1070-en.html
Numerical Study on Heave Plate Effects on Hydrodynamic Responses of Floating Offshore Wind Turbines
Mohammad Javad Eslahi1 , Saeid Kazemi * 2, Mojtaba Ezam3 , Madjid Ghodsi Hassanabad4
1- Ph.D. student, Department of Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
2- Assistant Professor, Department of Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
3- Assistant Professor, Department of Natural and Environmental Sciences, Science and Research Branch, Islamic Azad University, Tehran, Iran
4- Assistant Professor, Department of Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
Abstract:   (1179 Views)
A study was conducted on the initial stages of floating wind turbines design, which face significant challenges. The research focused on the comprehensive investigation of the aerodynamics of wind turbines, hydrodynamics of floating platforms, and dynamics of mooring lines. The study also examined the interaction between these components and their effects on each other. The research introduced a new design for the heave plate, optimizing its dimensions for supporting a 5-MW wind turbine in deep offshore waters near Jask Port in the Oman Sea. Through numerical simulations, the study evaluated the coupled dynamic responses of the floating wind turbine system to wave loads, currents, tides, and winds. The findings demonstrated that the optimized heave plate effectively met operational requirements under normal and severe conditions. Additionally, the study highlighted the superior performance of the optimized heave plate in the structural-wave interaction, providing satisfactory results.
Keywords: Renewable energies, Semi-submersible wind turbine, Nonlinear hydrodynamic analysis, Optimization of the floating platform, Heave plate optimization
Full-Text [PDF 2592 kb]   (252 Downloads)    
Type of Study: Research Paper | Subject: Offshore Hydrodynamic
Received: 2023/10/31 | Accepted: 2024/02/15
References
1. Michelle Froese. "new hybrid floating offshore wind platform." February 6, 2019.Excipio Energy.
2. Yicheng Fan. "Numerical Study of a Proposed Semi-Submersible Floating Platform with Different Numbers of Offset Columns Based on the DeepCwind Prototype for Improving the Wave-Resistance Ability." 25 March 2019.School of Civil Engineering and Mechanics,Wuhan, China.
3. Kumar, C.S. "Offshore Structure Modeling." Vol. 9. 1994: World Scientific.
4. Lopez-Pavon, C. and A. Souto-Iglesias. "Hydrodynamic coefficients and pressure loads on heave plates for semi-submersible floating offshore wind turbines: A comparative analysis using large scale models." , 2015. Renewable Energy. [DOI:10.1115/OMAE2014-24163]
5. Abuzar Abazari & Mehdi Behzad. "A review of the researches on the added mass and damping coefficients for the heave plates of the offshore platforms at translational and rotational oscillations." April 2020. Faculty member of Chabahar Maritime University. [DOI:10.29252/marineeng.16.31.65]
6. Tracy C. "Parametric design of floating wind turbines." 2007. Massachusetts Institute of Technology.
7. Bachynski. "Design considerations for tension leg platform wind turbines." . 2012. Marine Structures. [DOI:10.1115/OMAE2013-10120]
8. Gilloteaux J. "Parametric analysis of a cylinder-like shape floating platform dedicated to multi-megawatt wind turbine." (2014). International Ocean and Polar Engineering . Korea: Busan; 2014.
9. Clauss GF. "Hydrodynamic shape optimization of large offshore structures." 1996. Ocean Research. [DOI:10.1016/S0141-1187(96)00028-4]
10. Haslum, H and O. Faltinsen. "Alternative shape of spar platform for use in hostile areas." 1999In Offshore Technology Conference. [DOI:10.4043/10953-MS] [PMID] []
11. Morison, J.R. "The Force Exerted by Surface Waves on Piles." . May 1, 1950.Journal of Petroleum Technology. [DOI:10.2118/950149-G]
12. MacCamy, R. C., and R. A. Fuchs. . "Wave Forces on Piles: A Diffraction Theory." December 1954Washington DC. Corps of Engineers.
13. Jonkman, Jason M., and W. Musial. "Offshore Code Comparison Collaboration (OC3) for IEA Wind Task 23 Offshore Wind Technology and Deployment." December 1, 2010. National Renewable Energy Lab. [DOI:10.2172/1004009]
14. IEC-61400-3-1. "Design Requirements for Fixed Offshore Wind Turbines."April 2019
15. Hansen, Martin O. L. "Aerodynamics of Wind Turbines." . 2008.Earthscan.
16. Hansen. "A Beddoes-Leishman Type Dynamic Stall Model in State-Space and Indicial Formulations." . 2004. National Laboratory, Roskilde, Denmark.
17. A. Robertson, J. Jonkman, M. "Definition of the Semisubmersible Floating System for Phase II of OC4." January 2001 National Renewable Energy Laboratory.
18. J.M.J. Journée and W.W. Massie. "OFFSHORE HYDROMECHANICS." Delft University of Technology.
19. Giulio Ferri. "Optimal Dimensions of a Semisubmersible Floating Platform for a 10 MW Wind Turbine." . 15 June 2020.Department of Civil and Environmental Engineering. University of Florence, Italy. [DOI:10.3390/en13123092]
20. Crisfield, M, U Galvanetto"Dynamics of 3-D Co-Rotational Beams." .January 11, 1997. Computational Mechanics. [DOI:10.1007/s004660050271]
21. Larsen,Sørensen. "Dynamic wake meandering modeling.". June 2007.Wind Energy Department. Risø.
Send email to the article author

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Creative Commons License
International Journal of Maritime Technology is licensed under a

Creative Commons Attribution-NonCommercial 4.0 International License.