Write your message
Volume 8, Issue 16 (3-2013)                   Marine Engineering 2013, 8(16): 51-64 | Back to browse issues page

XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

hakimzadeh H, arshad Shabkhaneh B. Investigation on Effect of Offshore Pipelines Fitting Distances on Flow Separation around them Using Experimental and Numerical Models. Marine Engineering 2013; 8 (16) :51-64
URL: http://marine-eng.ir/article-1-213-en.html
1-
2- Faculty of Civil Eng., Sahand University of Technology
Abstract:   (13101 Views)
In this paper, in order to understand the flow-pipe interaction more clearly, the variations on flow separation around offshore pipelines with different ratios of fitting distances due to the steady current have experimentally and numerically been investigated. For the experimental modeling, a number of experiments have been conducted in the Hydraulic Research Laboratory. The experiments have been carried out in a flume with 10 meters length, 0.3 meters width and 0.5 meters depth using P.V.C pipe with 6.35 centimeters in diameter (for different distances to diameter ratios of fitting). To visualize the flow separation, the polystyrene particles having 1.05gr/cm3 in density were used. Also, in order to understand the phenomenon as well as possible, the whole processes of tests have been recorded using a digital camera. For the numerical simulation section, the flow fields have been analyzed using a computational fluid dynamics software "FLUENT". Finally, the results of numerical and experimental models were compared with one to another and good agreements were achieved between them. The results showed that with increasing the fitting distance between pipes, the separation length at downstream of the second pipe was gradually decreased, however, after a given distance the two pipes behaved separately.
Full-Text [PDF 2338 kb]   (3055 Downloads)    
Type of Study: Research Paper | Subject: Offshore Hydrodynamic
Received: 2012/10/8 | Accepted: 2013/10/19

Send email to the article author


Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Creative Commons License
International Journal of Maritime Technology is licensed under a

Creative Commons Attribution-NonCommercial 4.0 International License.