مهندسی دریا
Marine Engineering
Engineering & Technology
http://marine-eng.ir
1
admin
1735-7608
2645-8136
10.61186/marineeng
fa
jalali
1394
12
1
gregorian
2016
3
1
11
22
online
1
fulltext
fa
محافظت از خطوط لوله فراساحلی با اضافه نمودن یک تیغه ی طولی نفوذ ناپذیر به زیر لوله
Protection of Offshore Pipelines with Adding a Longitudinal Blade beneath the Pipe
هیدروديناميك سازه های ساحلی و فراساحلی
Offshore Hydrodynamic
مقاله پژوهشي
Research Paper
<p>در این مقاله به منظور کاهش آبشستگی در اطراف خطوط لوله فراساحلی، تعدادی آزمایش تجربی جهت بررسی تاثیر اضافه شدن یک تیغه ی طولی نفوذ ناپذیر به زیر لوله انجام شده است. مدلهای فیزیکی این مطالعه شامل سه لوله با قطر های متفاوت می باشند. هر کدام از لوله ها با شش عرض نسبی مختلف تیغه آزمایش شده اند. هدف از انجام این تحقیق، کاهش دادن گرادیان هیدرولیکی زیر لوله بوده است تا حدی که مقدار آن از گرادیان هیدرولیکی بحرانی فاصله گرفته و از اینرو وقوع آبشستگی را به تاخیر انداخته یا به کلی از آن جلوگیری کند. همچنین تعدادی شبیه سازی عددی با استفاده از نرم افزار Flow 3D انجام پذیرفت که در آن شرایط مرزی یکسانی با مدلهای فیزیکی بکار برده شد. در هر دو بررسی تجربی و عددی ابتدا نمونه ی شاهد که همان لوله بدون حفاظ است مورد آزمایش قرار گرفته است. سپس تیغه ای در عرض های نسبی متفاوت 0.05 ، 0.10 ، 0.15 ، 0.20 ، 0.25 و 0.50 به لوله اضافه شده و عملکرد آن در مقابل آبشستگی مورد آزمایش و تحلیل قرار گرفته است. نتایج حاصله از مدل فیزیکی و شبیه سازی عددی همخوانی مناسبی با یکدیگر داشتند و نشان دهنده کاهش چشمگیر آبشستگی در زیر لوله بعد از یک عرض نسبی مشخص تیغه مورد استفاده بوده است.</p>
<p>A number of experiments have been carried out in the current paper to investigate the effect of adding a longitudinal impermeable blade beneath the offshore pipelines on decreasing the scour around them. The main aim of this study was to reduce the hydraulics gradient beneath the pipe so that its magnitude recedes from the critical hydraulics gradient and therefore delays the onset of scour phenomenon or stops its process at all. Three pipes of different diameters were selected for the physical models of this study. Each pipe was tested using six blades with different relative widths. Also, a series of numerical simulations have been done using Flow3D software in which the similar boundary conditions as used for the physical models were applied. In both experimental and numerical investigations the reference sample that was an unprotected pipeline was first tested. Then blades with different relative widths (e.g, 0.05, 0.10, 0.15, 0.20, 0.25, 0.50) were added to the beneath of the pipeline and their performances were tested and analyzed against scour. The experimental and numerical results were in good agreement and they indicate a remarkable reduction in scour depth when a blade with the distinctive relative width was sticked to the pipeline.</p>
خطوط لوله فراساحلی, آبشستگی, تیغه طولی, مدل فیزیکی, مدل عددی
Offshore Pipelines, Scour, Longitudinal blade ,Experimental model, Numerical model
25
38
http://marine-eng.ir/browse.php?a_code=A-10-39-5&slc_lang=fa&sid=1
Habib
Hakimzadeh
حبیب
حکیم زاده
hakimzadeh@sut.ac.ir
10031947532846002172
10031947532846002172
Yes
Sahand University of Technology
دانشگاه صنعتی سهند
Alireza
Mohammadi
علیرضا
محمدی
10031947532846002173
10031947532846002173
No
دانشگاه صنعتی سهند